MEM31419

Certificate III in Engineering - Fixed and Mobile Plant Mechanic

Get started in your engineering career with this practical qualification. Successful completion of this course will qualify you to become a trade qualified plant mechanic.

STUDY LOCATIONS Greater Brisbane Darling Downs and South West Wide Bay Burnett North Queensland Central Queensland

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Get started in your engineering career with this practical qualification. Successful completion of this course will qualify you to become a trade qualified plant mechanic.

According to the Australian Government's Job Outlook service, jobs for engineering professionals will continue to see very strong growth for the next five years.

Learn the skills required to become an engineering tradesperson, with specialist skills in the assembly and commissioning of mobile and stationary plant. You will also become qualified in servicing, diagnosis and rectification of faults, condition monitoring, and preventative maintenance.

Successful completion of this course will give you the skills needed to apply for roles in the engineering industry. You can progress even further with pathways into higher-level qualifications.

What can I do?

Fixed and/or Mobile Plant Mechanic

Course outcome:

MEM31419 Certificate III in Engineering - Fixed and Mobile Plant Mechanic

Free apprenticeships for under 25s

The Queensland government is supporting young Queenslanders up to the age of 25 by providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications. Learn more>

Trade Skills Assessment and Gap Training Program

If you can demonstrate substantial competency in this qualification, you may be able to access funding for recognition of prior learning and gap training through the Trade Skills and Assessment Gap Training (TSAGT) program. TAFE Queensland is a proud recipient of funding from the Queensland Government, Department of Employment, Small Business and Training (DESBT) for this program (eligibility criteria apply). Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core units (33 points) listed below, plus a combination of elective units to a total value of 63 points. Please note, elective units have various points values.

Elective units will be selected in consultation with your employer and included on your training plan.

UNIT CODE
UNIT NAME

UNIT CODE
MEM09002

Interpret technical drawing

UNIT CODE :
MEM09002

Unit description :
This unit of competency defines the skills and knowledge required to interpret technical drawings.

Pre-requisite unit :
MEM12023 , MEM12024 , MEM13015 , MEM16006
UNIT NAME
Interpret technical drawing

UNIT CODE
MEM11011

Undertake manual handling

UNIT CODE :
MEM11011

Unit description :
This unit of competency defines the skills and knowledge required to lift and move materials manually and/or using basic manual handling equipment in a wide range of environments

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Undertake manual handling

UNIT CODE
MEM12023

Perform engineering measurements

UNIT CODE :
MEM12023

Unit description :
This unit of competency defines the skills and knowledge required to perform measurements requiring straightforward use of mechanical measuring devices which incorporate visual inspections representing units of measurement and associated calculations in a range of manufacturing, engineering and related environments. Measurements may be expressed in metric or imperial units.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Perform engineering measurements

UNIT CODE
MEM12024

Perform computations

UNIT CODE :
MEM12024

Unit description :
This unit of competency defines the skills and knowledge required to estimate approximate answers to arithmetical problems, carry out calculations involving percentages and proportions, and determine simple ratios and averages.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Perform computations

UNIT CODE
MEM13015

Work safely and effectively in manufacturing and engineering

UNIT CODE :
MEM13015

Unit description :
This unit of competency defines the skills and knowledge required to work effectively in manufacturing and engineering work situations, including planning routine work and participating in and following work health and safety (WHS) procedures.
UNIT NAME
Work safely and effectively in manufacturing and engineering

UNIT CODE
MEM14006

Plan work activities

UNIT CODE :
MEM14006

Unit description :
This unit of competency covers the skills and knowledge required to plan familiar work activities, whilst following established procedures and work health and safety (WHS) policies and procedures of the organisation.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Plan work activities

UNIT CODE
MEM16006

Organise and communicate information

UNIT CODE :
MEM16006

Unit description :
This unit of competency covers the skills and knowledge required to access, organise and communicate information related to production, maintenance or associated processes or tasks that apply in manufacturing, engineering or related environments.

Pre-requisite unit :
MEM13015
UNIT NAME
Organise and communicate information

UNIT CODE
MEM16008

Interact with computing technology

UNIT CODE :
MEM16008

Unit description :
This unit of competency defines the skills and knowledge required to use a range of computing technology typically used in manufacturing, engineering or related environments to access, input and store information.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Interact with computing technology

UNIT CODE
MEM17003

Assist in the provision of on the job training

UNIT CODE :
MEM17003

Unit description :
This unit of competency defines the skills and knowledge required to assist in the provision of on-the-job training to others while undertaking normal duties and it may involve the replacement of normal duties with training duties for limited periods of time.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Assist in the provision of on the job training

UNIT CODE
MEM18001

Use hand tools

UNIT CODE :
MEM18001

Unit description :
This unit of competency defines the skills and knowledge required to use a range of hand tools for a variety of general engineering applications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use hand tools

UNIT CODE
MEM18002

Use power tools/hand held operations

UNIT CODE :
MEM18002

Unit description :
This unit of competency defines the skills and knowledge required to use a range of hand held power tools and fixed power tools for hand held operations used in a variety of general engineering applications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use power tools/hand held operations

UNIT CODE
MEM18055

Dismantle, replace and assemble engineering components

UNIT CODE :
MEM18055

Unit description :
This unit of competency defines the skills and knowledge required to dismantle, identify faulty components, select replacements and assemble engineering components into assemblies or sub-assemblies in accordance with standard operating procedures (SOPs).

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002
UNIT NAME
Dismantle, replace and assemble engineering components

UNIT CODE
MEM27006

Diagnose and rectify batteries, low voltage sensors and circuits

UNIT CODE :
MEM27006

Unit description :
This unit of competency defines the skills and knowledge required to use test instruments, test the battery, assess and rectify wiring faults.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Diagnose and rectify batteries, low voltage sensors and circuits

UNIT CODE
MEM27016

Diagnose and maintain electronic controlling systems on mobile and stationary plant

UNIT CODE :
MEM27016

Unit description :
This unit of competency defines the skills and knowledge required to test, diagnose and fault find electronic control systems associated with mobile and stationary plant and equipment.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055 , MEM27006 , MEM27023
UNIT NAME
Diagnose and maintain electronic controlling systems on mobile and stationary plant

UNIT CODE
MEM27017

Maintain, fault find and rectify hydraulic systems for mobile plant

UNIT CODE :
MEM27017

Unit description :
This unit of competency defines the skills and knowledge required to test, fault find and rectify hydraulic systems used in the earthmoving, agricultural and transport industries.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain, fault find and rectify hydraulic systems for mobile plant

UNIT CODE
MEM27019

Diagnose, repair and replace diesel engines in stationary and mobile plant

UNIT CODE :
MEM27019

Unit description :
This unit of competency defines the skills and knowledge required to diagnose, repair and replace diesel engines used in mobile and stationary plant and equipment.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Diagnose, repair and replace diesel engines in stationary and mobile plant

UNIT CODE
MEM27020

Apply knowledge of large combustion engine operations to service and maintenance tasks

UNIT CODE :
MEM27020

Unit description :
This unit of competency defines the skills and knowledge required to identify engine features and operations essential for large engine servicing and maintenance tasks.

Pre-requisite unit :
MEM09002 , MEM13015 , MEM16006
UNIT NAME
Apply knowledge of large combustion engine operations to service and maintenance tasks

UNIT CODE
MEM27023

Diagnose and rectify fieldbus circuits in mobile and stationary plant and equipment

UNIT CODE :
MEM27023

Unit description :
This unit of competency defines the skills and knowledge required to carry out diagnosis and rectification of circuits used in controller area network (CAN) and other fieldbus systems and control technology components in mobile and stationary plant.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055 , MEM27006
UNIT NAME
Diagnose and rectify fieldbus circuits in mobile and stationary plant and equipment

UNIT CODE
MSMENV272

Participate in environmentally sustainable work practices

UNIT CODE :
MSMENV272

Unit description :
This unit describes the skills and knowledge required to comply with environmental regulations, identify environment issues and minimise the risks of negative impact on work and carry out improvements in own work area.
UNIT NAME
Participate in environmentally sustainable work practices

UNIT CODE
UNIT NAME

UNIT CODE
MEM05007

Perform manual heating and thermal cutting

UNIT CODE :
MEM05007

Unit description :
This unit of competency defines the skills and knowledge required to perform manual heating, thermal cutting and gouging including the assembly and disassembly and operation of the equipment on a range of materials

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006
UNIT NAME
Perform manual heating and thermal cutting

UNIT CODE
MEM05012

Perform routine manual metal arc welding

UNIT CODE :
MEM05012

Unit description :
This unit of competency defines the skills and knowledge required to carry out routine manual metal arc welding (MMAW) of low carbon mild steel where the welding is not required to meet an Australian Standard or equivalent.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform routine manual metal arc welding

UNIT CODE
MEM05049

Perform routine gas tungsten arc welding

UNIT CODE :
MEM05049

Unit description :
This unit of competency defines the skills and knowledge required to prepare the materials and carry out routine gas tungsten arc welding (GTAW) and applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform routine gas tungsten arc welding

UNIT CODE
MEM05050

Perform routine gas metal arc welding

UNIT CODE :
MEM05050

Unit description :
This unit of competency defines the skills and knowledge required to prepare materials and carry out routine gas metal arc welding (GMAW) and applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard or equivalent.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform routine gas metal arc welding

UNIT CODE
MEM18003

Use tools for precision work

UNIT CODE :
MEM18003

Unit description :
This unit of competency defines the skills and knowledge required to use tools to manually produce work to precise dimensions and/or finishes.

Pre-requisite unit :
MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002
UNIT NAME
Use tools for precision work

UNIT CODE
MEM27001

Maintain and repair stationary and mobile plant engine cooling systems

UNIT CODE :
MEM27001

Unit description :
This unit of competency defines the skills and knowledge required to maintain and repair the cooling systems of combustion engines used in mobile and stationary plant and equipment.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain and repair stationary and mobile plant engine cooling systems

UNIT CODE
MEM27002

Test and repair compression ignition systems

UNIT CODE :
MEM27002

Unit description :
This unit of competency defines the skills and knowledge required to assess the operation of compression ignition systems.

Pre-requisite unit :
MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001
UNIT NAME
Test and repair compression ignition systems

UNIT CODE
MEM27004

Maintain and repair engine lubrication systems

UNIT CODE :
MEM27004

Unit description :
This unit of competency defines the skills and knowledge required to assess lubrication system operations and repair or replace faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain and repair engine lubrication systems

UNIT CODE
MEM27005

Tune diesel engines

UNIT CODE :
MEM27005

Unit description :
This unit of competency defines the skills and knowledge required to compression test and tune up the engine.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055 , MEM27002
UNIT NAME
Tune diesel engines

UNIT CODE
MEM27008

Maintain induction, exhaust and emission control systems

UNIT CODE :
MEM27008

Unit description :
This unit of competency defines the skills and knowledge required to assess induction, exhaust and emission control system operation and repair or replace faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain induction, exhaust and emission control systems

UNIT CODE
MEM27009

Diagnose and rectify braking systems

UNIT CODE :
MEM27009

Unit description :
This unit of competency defines the skills and knowledge required to check and assess braking systems, and replace/repair/overhaul braking system components associated with mobile equipment.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Diagnose and rectify braking systems

UNIT CODE
MEM27011

Maintain track type undercarriage on mobile plant

UNIT CODE :
MEM27011

Unit description :
This unit of competency defines the skills and knowledge required to maintain track assemblies, including checking components, clearances, tension and replacing any faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain track type undercarriage on mobile plant

UNIT CODE
MEM27012

Maintain mobile plant suspension systems

UNIT CODE :
MEM27012

Unit description :
This unit of competency defines the skills and knowledge required to assess, maintain and repair/replace suspension systems of all types of wheeled and/or tracked plant/vehicles.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain mobile plant suspension systems

UNIT CODE
MEM27013

Maintain steering systems

UNIT CODE :
MEM27013

Unit description :
This unit of competency defines the skills and knowledge required to assess steering system operation, and repair or replace faulty components on steering systems for vehicles, mobile plant and equipment.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Maintain steering systems

UNIT CODE
MEM27014

Diagnose and rectify automatic transmissions

UNIT CODE :
MEM27014

Unit description :
This unit of competency defines the skills and knowledge required to assess converter/transmission operation, and repair or replace faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Diagnose and rectify automatic transmissions

UNIT CODE
MEM27015

Diagnose and rectify drive line and final drives

UNIT CODE :
MEM27015

Unit description :
This unit of competency defines the skills and knowledge required to assess drive line and final drive operation, and repair or replace faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Diagnose and rectify drive line and final drives

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Ipswich	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Roma	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Warwick	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Toowoomba	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Dalby	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Kingaroy	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Bundaberg	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Mount Isa	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Cairns	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Innisfail	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Townsville - Trade Training Centre Bohle	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Biloela	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Engineering - Fixed and Mobile Plant Mechanic (MEM31419)

Ask a question

Certificate III in Engineering - Fixed and Mobile Plant Mechanic

COURSE CODE: MEM31419

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

safety glasses
protective footwear with safety toe cap and non-slip soles to AS2210
leather gloves
hair protection
You should also wear 100% cotton drill industry-standard clothing

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

It is recommended that you have access to a reliable internet connection to access TAFE Queensland's online learning system Connect, and a computer with up-to-date software, including Microsoft Office and Adobe Acrobat Reader. This equipment and software is available for use at all TAFE Queensland locations.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate III in Mobile Plant Technology

Take the next step in your mechanical career and get the practical skills you need to become a technician working on mobile plant such as Mining trucks, Excavators, Elevated work platforms and Forklifts.

Careers

Automotive Forklift Mechanic
Automotive Forklift Repair Technician
Elevating Work Platform Technician
Forklift Technician
Diesel Fitter
Earthmoving Equipment Technician

Certificate III in Heavy Commercial Vehicle Mechanical Technology

This course will qualify you to become a heavy vehicle mechanical technician working on trucks, buses, earthmoving equipment or agricultural machinery.

Careers

Diesel Motor Mechanic
Heavy Commercial Vehicle Technician
Heavy Vehicle Mechanic

Full Time : 2 years

Next Start : 28 Jan 2025

Certificate II in Automotive Vocational Preparation

Prepare for your career in the light and heavy automotive and marine industries with this entry-level course. This qualification will give you the basic skills and knowledge needed to pursue a heavy commercial vehicle repair, light vehicle repair, mobile plant repair, diesel fitting or marine mechanical apprenticeship.

Careers

Vehicle Service Assistant
Automotive Apprentice
Marine Service Assistant
Marine Mechanical Apprentice

Full Time : 10 weeks

Next Start : 28 Jan 2025

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Engineering - Fixed and Mobile Plant Mechanic

Course overview

What can I do?

Course outcome:

Free apprenticeships for under 25s

Trade Skills Assessment and Gap Training Program

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Engineering - Fixed and Mobile Plant Mechanic

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Selection criteria

Resources required

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate III in Mobile Plant Technology

Careers

Certificate III in Heavy Commercial Vehicle Mechanical Technology

Careers

Certificate II in Automotive Vocational Preparation

Careers