MEM30219

Certificate III in Engineering - Mechanical Trade

Machining

Progress your trade career in mechanical engineering with this practical course. Complete this qualification as part of your apprenticeship to become a trade qualified machinist.

STUDY LOCATIONS Greater Brisbane North Queensland

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Become a trade qualified machinist by completing this qualification as part of your apprenticeship. With greater demand in maintenance, repair and modification, machinists have opportunities in a range of industries.

In this course you will learn to create and modify parts made primarily of metal, plastic, or wood. It provides you the skills to follow technical drawings, and design, assemble, manufacture and install components in mechanical equipment. You'll also learn to fault-find, maintain and service mechanical equipment, machinery and fluid power systems. Our industry-expert teachers will train you on the latest technology and equipment to ensure you are skilled to industry standards.

Successful completion of this qualification as an apprentice allows you to become a trade-recognised machinist and continue to progress your career.

What can I do?

Mechanical Engineering Technician
Machinist

Course outcome:

MEM30219 Certificate III in Engineering - Mechanical Trade (Machining)

Trade skills assessment and gap training program

If you can demonstrate substantial competency in this qualification, you may be able to access funding for recognition of prior learning and gap training through the Trade Skills and Assessment Gap Training (TSAGT) program. TAFE Queensland is a proud recipient of funding from the Queensland Government, Department of Employment, Small Business and Training (DESBT) for this program. Only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

Free apprenticeships for under 25s

The Queensland government is supporting young Queenslanders up to the age of 25 by providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core units (33 points) listed below, plus a combination of elective units to a total value of 96 points. Please note, elective units have various points values.

Elective units will be selected in consultation with your employer and included on your training plan.

UNIT CODE
UNIT NAME

UNIT CODE
MEM09002

Interpret technical drawing

UNIT CODE :
MEM09002

Unit description :
This unit of competency defines the skills and knowledge required to interpret technical drawings.

Pre-requisite unit :
MEM12023 , MEM12024 , MEM13015 , MEM16006
UNIT NAME
Interpret technical drawing

UNIT CODE
MEM11011

Undertake manual handling

UNIT CODE :
MEM11011

Unit description :
This unit of competency defines the skills and knowledge required to lift and move materials manually and/or using basic manual handling equipment in a wide range of environments

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Undertake manual handling

UNIT CODE
MEM12023

Perform engineering measurements

UNIT CODE :
MEM12023

Unit description :
This unit of competency defines the skills and knowledge required to perform measurements requiring straightforward use of mechanical measuring devices which incorporate visual inspections representing units of measurement and associated calculations in a range of manufacturing, engineering and related environments. Measurements may be expressed in metric or imperial units.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Perform engineering measurements

UNIT CODE
MEM12024

Perform computations

UNIT CODE :
MEM12024

Unit description :
This unit of competency defines the skills and knowledge required to estimate approximate answers to arithmetical problems, carry out calculations involving percentages and proportions, and determine simple ratios and averages.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Perform computations

UNIT CODE
MEM13015

Work safely and effectively in manufacturing and engineering

UNIT CODE :
MEM13015

Unit description :
This unit of competency defines the skills and knowledge required to work effectively in manufacturing and engineering work situations, including planning routine work and participating in and following work health and safety (WHS) procedures.
UNIT NAME
Work safely and effectively in manufacturing and engineering

UNIT CODE
MEM14006

Plan work activities

UNIT CODE :
MEM14006

Unit description :
This unit of competency covers the skills and knowledge required to plan familiar work activities, whilst following established procedures and work health and safety (WHS) policies and procedures of the organisation.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Plan work activities

UNIT CODE
MEM16006

Organise and communicate information

UNIT CODE :
MEM16006

Unit description :
This unit of competency covers the skills and knowledge required to access, organise and communicate information related to production, maintenance or associated processes or tasks that apply in manufacturing, engineering or related environments.

Pre-requisite unit :
MEM13015
UNIT NAME
Organise and communicate information

UNIT CODE
MEM16008

Interact with computing technology

UNIT CODE :
MEM16008

Unit description :
This unit of competency defines the skills and knowledge required to use a range of computing technology typically used in manufacturing, engineering or related environments to access, input and store information.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Interact with computing technology

UNIT CODE
MEM17003

Assist in the provision of on the job training

UNIT CODE :
MEM17003

Unit description :
This unit of competency defines the skills and knowledge required to assist in the provision of on-the-job training to others while undertaking normal duties and it may involve the replacement of normal duties with training duties for limited periods of time.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Assist in the provision of on the job training

UNIT CODE
MEM18001

Use hand tools

UNIT CODE :
MEM18001

Unit description :
This unit of competency defines the skills and knowledge required to use a range of hand tools for a variety of general engineering applications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use hand tools

UNIT CODE
MEM18002

Use power tools/hand held operations

UNIT CODE :
MEM18002

Unit description :
This unit of competency defines the skills and knowledge required to use a range of hand held power tools and fixed power tools for hand held operations used in a variety of general engineering applications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use power tools/hand held operations

UNIT CODE
MSMENV272

Participate in environmentally sustainable work practices

UNIT CODE :
MSMENV272

Unit description :
This unit describes the skills and knowledge required to comply with environmental regulations, identify environment issues and minimise the risks of negative impact on work and carry out improvements in own work area.
UNIT NAME
Participate in environmentally sustainable work practices

UNIT CODE
UNIT NAME

UNIT CODE
MEM05005

Carry out mechanical cutting

UNIT CODE :
MEM05005

Unit description :
This unit of competency defines the skills and knowledge required to set up and operate a range of mechanical cutting and holing equipment.

Pre-requisite unit :
MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001
UNIT NAME
Carry out mechanical cutting

UNIT CODE
MEM05006

Perform brazing and/or silver soldering

UNIT CODE :
MEM05006

Unit description :
This unit of competency defines the skills and knowledge required to perform brazing (including braze welding) and/or silver soldering and includes the preparation of materials and equipment and the inspection of the completed work.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform brazing and/or silver soldering

UNIT CODE
MEM05007

Perform manual heating and thermal cutting

UNIT CODE :
MEM05007

Unit description :
This unit of competency defines the skills and knowledge required to perform manual heating, thermal cutting and gouging including the assembly and disassembly and operation of the equipment on a range of materials

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006
UNIT NAME
Perform manual heating and thermal cutting

UNIT CODE
MEM05012

Perform routine manual metal arc welding

UNIT CODE :
MEM05012

Unit description :
This unit of competency defines the skills and knowledge required to carry out routine manual metal arc welding (MMAW) of low carbon mild steel where the welding is not required to meet an Australian Standard or equivalent.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform routine manual metal arc welding

UNIT CODE
MEM05049

Perform routine gas tungsten arc welding

UNIT CODE :
MEM05049

Unit description :
This unit of competency defines the skills and knowledge required to prepare the materials and carry out routine gas tungsten arc welding (GTAW) and applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform routine gas tungsten arc welding

UNIT CODE
MEM05050

Perform routine gas metal arc welding

UNIT CODE :
MEM05050

Unit description :
This unit of competency defines the skills and knowledge required to prepare materials and carry out routine gas metal arc welding (GMAW) and applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard or equivalent.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform routine gas metal arc welding

UNIT CODE
MEM06007

Perform basic incidental heat/quenching, tempering and annealing

UNIT CODE :
MEM06007

Unit description :
This unit of competency defines the skills and knowledge required to perform straightforward heating/quenching, tempering and annealing materials to specifications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform basic incidental heat/quenching, tempering and annealing

UNIT CODE
MEM07005

Perform general machining

UNIT CODE :
MEM07005

Unit description :
This unit of competency has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trade-level skills in non-computer numerical controlled (CNC) machining of ferrous and non-ferrous materials.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform general machining

UNIT CODE
MEM07006

Perform lathe operations

UNIT CODE :
MEM07006

Unit description :
This unit of competency has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trade-level skills in performing machining operations on a lathe to produce components to required tolerances and specifications using all types of accessories.

Pre-requisite unit :
MEM07005 , MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform lathe operations

UNIT CODE
MEM07007

Perform milling operations

UNIT CODE :
MEM07007

Unit description :
This unit of competency has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trade-level skills in using a range of milling machines to produce components to required tolerances and specifications using all types of accessories.

Pre-requisite unit :
MEM07005 , MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform milling operations

UNIT CODE
MEM07008

Perform grinding operations

UNIT CODE :
MEM07008

Unit description :
This unit of competency has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trad- level skills in performing grinding operations and checking finished components for conformance to specifications.

Pre-requisite unit :
MEM07005 , MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform grinding operations

UNIT CODE
MEM07011

Perform complex milling operations

UNIT CODE :
MEM07011

Unit description :
This unit of competency defines the skills and knowledge required to perform complex milling operations on a range of materials, including non-standard metals and alloys.

Pre-requisite unit :
MEM07005 , MEM07007 , MEM09002 , MEM11011 , MEM12003 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform complex milling operations

UNIT CODE
MEM07013

Perform machining operations using horizontal and vertical boring machines

UNIT CODE :
MEM07013

Unit description :
This unit of competency defines the skills and knowledge required to perform horizontal and vertical boring operations on standard engineering materials using cutting tools and precision measuring instruments.

Pre-requisite unit :
MEM07005 , MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform machining operations using horizontal and vertical boring machines

UNIT CODE
MEM07015

Set computer controlled machines and processes

UNIT CODE :
MEM07015

Unit description :
This unit of competency defines the skills and knowledge required to set computer controlled machines and processes.

Pre-requisite unit :
MEM07005 , MEM07028 , MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Set computer controlled machines and processes

UNIT CODE
MEM07016

Set and edit computer controlled machines and processes

UNIT CODE :
MEM07016

Unit description :
This unit of competency defines the skills and knowledge required to set and edit computer controlled machines and processes.

Pre-requisite unit :
MEM07005 , MEM07015 , MEM07028 , MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Set and edit computer controlled machines and processes

UNIT CODE
MEM07021

Perform complex lathe operations

UNIT CODE :
MEM07021

Unit description :
This unit of competency defines the skills and knowledge required to perform complex turning operations on a range of materials, including non-standard metals and alloys.

Pre-requisite unit :
MEM07005 , MEM07006 , MEM09002 , MEM11011 , MEM12003 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001
UNIT NAME
Perform complex lathe operations

UNIT CODE
MEM10006

Install machine/plant

UNIT CODE :
MEM10006

Unit description :
This unit of competency defines the skills and knowledge required to install machine/plant where the equipment being installed requires substantial modification to the existing site and/or connecting equipment and excludes minor modifications.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18009 , MEM18055
UNIT NAME
Install machine/plant

UNIT CODE
MEM12002

Perform electrical/electronic measurement

UNIT CODE :
MEM12002

Unit description :
This unit of competency defines the skills and knowledge required to use basic electro-measuring devices to check variables and applies to the measurement of voltage, current, resistance, power and frequency on a.c. and d.c. circuits up to 1000 volts.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform electrical/electronic measurement

UNIT CODE
MEM12003

Perform precision mechanical measurement

UNIT CODE :
MEM12003

Unit description :
This unit of competency defines the skills and knowledge required to perform precision mechanical measurement.

Pre-requisite unit :
MEM11011 , MEM12023 , MEM13015 , MEM16006
UNIT NAME
Perform precision mechanical measurement

UNIT CODE
MEM12006

Mark off/out (general engineering)

UNIT CODE :
MEM12006

Unit description :
This unit of competency has been developed for engineering tradesperson - mechanical apprenticeship training and the recognition of trade-level skills in marking off/out in general engineering.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006
UNIT NAME
Mark off/out (general engineering)

UNIT CODE
MEM13001

Perform emergency first aid

UNIT CODE :
MEM13001

Unit description :
This unit of competency defines the skills and knowledge required to apply the administration of basic emergency first aid treatment and the management of life threatening situations where an unconscious person requires expired air resuscitation (EAR) and cardiopulmonary resuscitation (CPR).

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform emergency first aid

UNIT CODE
MEM15004

Perform inspection

UNIT CODE :
MEM15004

Unit description :
This unit of competency defines the skills and knowledge required to inspect products, keep records and provide feedback on the conformance of product to specifications and applies to inspection of completed or partly completed products produced by others. It applies to a range of manufacturing enterprises and requires application of a range of measuring equipment/devices/ tools.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Perform inspection

UNIT CODE
MEM16005

Operate as a team member to conduct manufacturing, engineering or related activities

UNIT CODE :
MEM16005

Unit description :
This unit of competency defines the skills and knowledge required to operate as a member of a team, where operations and outcomes are dependent on the performance of the entire team, and applies to a range of team activities that are carried out within a section of a manufacturing, engineering or a related work environment.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Operate as a team member to conduct manufacturing, engineering or related activities

UNIT CODE
MEM18003

Use tools for precision work

UNIT CODE :
MEM18003

Unit description :
This unit of competency defines the skills and knowledge required to use tools to manually produce work to precise dimensions and/or finishes.

Pre-requisite unit :
MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002
UNIT NAME
Use tools for precision work

UNIT CODE
MEM18004

Maintain and overhaul mechanical equipment

UNIT CODE :
MEM18004

Unit description :
This unit of competency defines the skills and knowledge required to diagnose, locate faults, repair, overhaul, fit and adjust mechanical systems and equipment.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18005 , MEM18006 , MEM18007 , MEM18009 , MEM18011 , MEM18055
UNIT NAME
Maintain and overhaul mechanical equipment

UNIT CODE
MEM18005

Perform fault diagnosis, installation and removal of bearings

UNIT CODE :
MEM18005

Unit description :
This unit of competency defines the skills and knowledge required to perform fault diagnosis, installation and removal of bearings.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18055
UNIT NAME
Perform fault diagnosis, installation and removal of bearings

UNIT CODE
MEM18006

Perform precision fitting of engineering components

UNIT CODE :
MEM18006

Unit description :
This unit of competency has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trade-level skills in precision fitting and mechanical repair.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18055
UNIT NAME
Perform precision fitting of engineering components

UNIT CODE
MEM18007

Maintain and repair mechanical drives and mechanical transmission assemblies

UNIT CODE :
MEM18007

Unit description :
This unit of competency defines the skills and knowledge required to undertake maintenance, diagnose faults and repair drives and transmission assemblies, and undertake final adjustment and commissioning on industrial machinery.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18055
UNIT NAME
Maintain and repair mechanical drives and mechanical transmission assemblies

UNIT CODE
MEM18009

Perform precision levelling and alignment of machines and engineering components

UNIT CODE :
MEM18009

Unit description :
This unit of competency defines the skills and knowledge required to undertake levelling and alignment measurements/readings and perform levelling and/or alignment and adjustment tasks on machines and engineering components

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18055
UNIT NAME
Perform precision levelling and alignment of machines and engineering components

UNIT CODE
MEM18010

Perform equipment condition monitoring and recording

UNIT CODE :
MEM18010

Unit description :
This unit of competency defines the skills and knowledge required to undertake condition monitoring of equipment, including recording the results.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002 , MEM18055
UNIT NAME
Perform equipment condition monitoring and recording

UNIT CODE
MEM18011

Shut down and isolate machines/equipment

UNIT CODE :
MEM18011

Unit description :
This unit of competency defines the skills and knowledge required to isolate and shut down machines and equipment and applies to situations that require extensive system knowledge that exclude the straightforward starting/stopping of machinery/equipment through the use of simple switching, including use of emergency switches.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Shut down and isolate machines/equipment

UNIT CODE
MEM18012

Perform installation and removal of mechanical seals

UNIT CODE :
MEM18012

Unit description :
This unit of competency defines the skills and knowledge required to check, dismantle, select, reassemble and install a range of mechanical seals.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18055
UNIT NAME
Perform installation and removal of mechanical seals

UNIT CODE
MEM18013

Perform gland packing

UNIT CODE :
MEM18013

Unit description :
This unit of competency defines the skills and knowledge required to inspect glands and gland packing and remove and replace or top up gland packing. It applies to packing for high or low temperatures and pressures, solids, gases and liquids.

Pre-requisite unit :
MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001
UNIT NAME
Perform gland packing

UNIT CODE
MEM18018

Maintain pneumatic system components

UNIT CODE :
MEM18018

Unit description :
This unit of competency defines the skills and knowledge required to check pneumatic system components, identify and repair or replace faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18055
UNIT NAME
Maintain pneumatic system components

UNIT CODE
MEM18020

Maintain hydraulic system components

UNIT CODE :
MEM18020

Unit description :
This unit of competency defines the skills and knowledge required to check hydraulic system components, identify, and repair or replace faulty components.

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM12024 , MEM13015 , MEM14006 , MEM16006 , MEM18001 , MEM18002 , MEM18003 , MEM18006 , MEM18055
UNIT NAME
Maintain hydraulic system components

UNIT CODE
MEM18055

Dismantle, replace and assemble engineering components

UNIT CODE :
MEM18055

Unit description :
This unit of competency defines the skills and knowledge required to dismantle, identify faulty components, select replacements and assemble engineering components into assemblies or sub-assemblies in accordance with standard operating procedures (SOPs).

Pre-requisite unit :
MEM09002 , MEM11011 , MEM12023 , MEM13015 , MEM16006 , MEM18001 , MEM18002
UNIT NAME
Dismantle, replace and assemble engineering components

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Eagle Farm	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Bowen	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Cairns	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Innisfail	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Townsville - Trade Training Centre Bohle	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Engineering - Mechanical Trade (MEM30219)

Ask a question

Certificate III in Engineering - Mechanical Trade

COURSE CODE: MEM30219

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

safety glasses
protective footwear with safety toe cap and non-slip soles to AS2210
long leather gloves to AS2161
hair protection
You should also wear 100% cotton drill industry-standard clothing.

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

It is recommended that you have access to a reliable internet connection to access TAFE Queensland's online learning system Connect, and a computer with up-to-date software, including Microsoft Office and Adobe Acrobat Reader. This equipment and software is available for use at all TAFE Queensland locations.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Diploma of Engineering - Technical

Progress your career with this advanced technical qualification. Develop your skills further for technician work in the field of mechanical, mechatronic, manufacturing or maintenance engineering.

Careers

Engineering Technologist
Engineering Technician
Mechanical Engineering Technician

Full Time : 1 year

Next Start : 03 Feb 2025

Certificate IV in Engineering

Take your career in engineering to the next level with this advanced, post-trade qualification.

Careers

Higher Engineering Tradesperson
Special Class Engineering Tradesperson