Certificate III in Flooring Technology

General Electives

• General Electives

• UNIT CODE
• CPCCWHS2001
  Apply WHS requirements, policies and procedures in the construction industry

  UNIT CODE :

  CPCCWHS2001

  Unit description :

  This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces.
• UNIT NAME
• Apply WHS requirements, policies and procedures in the construction industry
  

• UNIT CODE
• MSFFL2031
  Remove existing floor coverings

  UNIT CODE :

  MSFFL2031

  Unit description :

  This unit describes the skills and knowledge required to remove existing floor coverings.
• UNIT NAME
• Remove existing floor coverings
  

• UNIT CODE
• MSFFL2033
  Install hard underlays

  UNIT CODE :

  MSFFL2033

  Unit description :

  This unit describes the skills and knowledge required to cut and fit hard underlay materials prior to laying floor coverings.
• UNIT NAME
• Install hard underlays
  

• UNIT CODE
• MSFFL2035
  Mechanically prepare surfaces for installation of flooring materials

  UNIT CODE :

  MSFFL2035

  Unit description :

  This unit describes the skills and knowledge required to select and use powered equipment for the preparation of surfaces prior to the installation of flooring materials.
• UNIT NAME
• Mechanically prepare surfaces for installation of flooring materials
  

• UNIT CODE
• MSFFL2038
  Install lay flat vinyl floor coverings

  UNIT CODE :

  MSFFL2038

  Unit description :

  This unit describes the skills and knowledge required to set out, lay and cut flat vinyl floor coverings to single and connecting rooms using pattern matching, seam cutting, joining and sealing techniques.
• UNIT NAME
• Install lay flat vinyl floor coverings
  

• UNIT CODE
• MSFFL3066
  Install linoleum floor coverings

  UNIT CODE :

  MSFFL3066

  Unit description :

  This unit describes the skills and knowledge required to set out, cut and lay linoleum floor coverings in domestic and commercial installations using templating and scribing methods.
• UNIT NAME
• Install linoleum floor coverings
  

• UNIT CODE
• MSFFL3068
  Install resilient floor coverings using custom designs and decorative finishes

  UNIT CODE :

  MSFFL3068

  Unit description :

  This unit describes the skills and knowledge required to prepare, set out lay and fix resilient sheet floor coverings using custom designs, mechanically and hand cut motifs, logos and decorative finishes.
• UNIT NAME
• Install resilient floor coverings using custom designs and decorative finishes
  

• UNIT CODE
• MSFFL3105
  Install laminate and hybrid vinyl flooring

  UNIT CODE :

  MSFFL3105

  Unit description :

  This unit describes the skills and knowledge required to install laminate and hybrid vinyl flooring including flooring of composite materials intended for floating installation: that is, products that are not recommended for direct fixing.
• UNIT NAME
• Install laminate and hybrid vinyl flooring
  

• UNIT CODE
• MSFFL3114
  Install resilient tiles and planks

  UNIT CODE :

  MSFFL3114

  Unit description :

  This unit describes the skills and knowledge required to prepare, set out, cut, lay and fix resilient tiles and planks in single and multiple connecting rooms using both single and multi-directional installation methods. It includes the installation of tiles and planks with specific design features such as patterns, motifs and logos.
• UNIT NAME
• Install resilient tiles and planks
  

• UNIT CODE
• MSFFL3115
  Install commercial sheet vinyl flooring

  UNIT CODE :

  MSFFL3115

  Unit description :

  This unit describes the skills and knowledge required to prepare, cut, weld, lay out and fasten vinyl (heterogeneous and homogenous) sheet flooring to large areas including complex areas (such as wet areas, stairs, stringers and steps).
• UNIT NAME
• Install commercial sheet vinyl flooring
  

• UNIT CODE
• MSS402055
  Apply quality standards

  UNIT CODE :

  MSS402055

  Unit description :

  This unit describes the skills and knowledge required to apply procedures to monitor the quality of own work and take action to ensure that quality standards are met.
• UNIT NAME
• Apply quality standards
  

Timber

• Timber

• UNIT CODE
• MSFFL2040
  Install engineered timber flooring

  UNIT CODE :

  MSFFL2040

  Unit description :

  This unit describes the skills and knowledge required to prepare for work and install, stick by stick, an engineered timber floor within a space over a soft underlay, including preparation, cutting, laying and fixing.
• UNIT NAME
• Install engineered timber flooring
  

• UNIT CODE
• MSFFL2042
  Nail strip timber flooring

  UNIT CODE :

  MSFFL2042

  Unit description :

  This unit describes the skills and knowledge required to use top-nailing or secret nailing methods when installing tongue and groove strip timber flooring onto plywood underlay and battens over joists, concrete or a subfloor to either raise a floor or correct the level of a floor.
• UNIT NAME
• Nail strip timber flooring
  

• UNIT CODE
• MSFFL2045
  Coarse sand timber flooring

  UNIT CODE :

  MSFFL2045

  Unit description :

  This unit describes the skills and knowledge required to prepare for work and coarse sand existing floors using a drum or belt driven sanding machine to grade the surface to remove cupping, ridges, high points or deep scratches. This usually involves three passes and the gradual overlapping of each run.
• UNIT NAME
• Coarse sand timber flooring
  

• UNIT CODE
• MSFFL3079
  Adapt and apply custom designs to timber flooring

  UNIT CODE :

  MSFFL3079

  Unit description :

  This unit describes the skills and knowledge required prepare and present a range of design solutions to fulfill a design brief, including the interpretation of technical drawings, design schedules, and the adaption of installation systems and materials to provide solutions to environmental issues.
• UNIT NAME
• Adapt and apply custom designs to timber flooring
  

• UNIT CODE
• MSFFL3080
  Install timber flooring materials to stairs

  UNIT CODE :

  MSFFL3080

  Unit description :

  This unit describes the skills and knowledge required to prepare, set out, cut and lay timber flooring materials to stairs and steps.
• UNIT NAME
• Install timber flooring materials to stairs
  

• UNIT CODE
• MSFFL3090
  Apply water-based coatings to timber floors

  UNIT CODE :

  MSFFL3090

  Unit description :

  This unit describes the skills and knowledge required to select water-based coating systems appropriate for the job, prepare for the work and apply the selected coatings to timber and parquetry floors.
• UNIT NAME
• Apply water-based coatings to timber floors
  

• UNIT CODE
• MSFFL3119
  Install timber battens and plywood in preparation to install strip timber

  UNIT CODE :

  MSFFL3119

  Unit description :

  This unit describes the skills and knowledge required to prepare for work, lay a moisture vapour barrier and cut and fix timber battens or plywood before installing strip timber, which is not included in this unit. Battens may be used to either raise a floor or correct the level of a floor. The unit does not address nailing strip timber flooring or installing direct stick timber flooring.
• UNIT NAME
• Install timber battens and plywood in preparation to install strip timber
  

• UNIT CODE
• MSFFL3120
  Install timber flooring on joists

  UNIT CODE :

  MSFFL3120

  Unit description :

  This unit describes the skills and knowledge required to plan, prepare and install timber strip flooring, ply and reconstituted timber sheet product directly onto joists, install decking directly onto joists and remove and replace boards in an existing timber floor directly onto joists.
• UNIT NAME
• Install timber flooring on joists
  

• UNIT CODE
• MSFFL3122
  Fine sand timber floors

  UNIT CODE :

  MSFFL3122

  Unit description :

  This unit describes the skills and knowledge required to prepare for work and fine sand existing floors either after coarse sanding, where only minor rectification of scratches or wear and tear has occurred, or between coats. It involves operating rotary sanding machines.
• UNIT NAME
• Fine sand timber floors
  

• UNIT CODE
• MSFFL3123
  Edge sand timber floors

  UNIT CODE :

  MSFFL3123

  Unit description :

  This unit describes the skills and knowledge required to prepare for work and edge sand existing floors using a disc, orbital or belt sander to grade the surface and remove cupping, ridges, high points or deep scratches along the edges of the room, in corners or areas of reduced access (such as wardrobes). The pattern of sanding is to overlap and blend the floorboards into the body of the sanded floor.
• UNIT NAME
• Edge sand timber floors
  

Polished Concrete

• Polished Concrete

• UNIT CODE
• CPCCON3046
  Repair and rectify concrete

  UNIT CODE :

  CPCCON3046

  Unit description :

  This unit of competency specifies the skills and knowledge required to repair and rectify defects in concrete.

  
  

  Pre-requisite unit :

  CPCCWHS2001
• UNIT NAME
• Repair and rectify concrete
  

• UNIT CODE
• CPCCON3047
  Cut concrete

  UNIT CODE :

  CPCCON3047

  Unit description :

  This unit of competency specifies the skills and knowledge required to safely cut concrete. It requires using concrete and masonry saws to cut concrete to specification.

  
  

  Pre-requisite unit :

  CPCCWHS2001
• UNIT NAME
• Cut concrete
  

• UNIT CODE
• MSFFL3057
  Select and fit diamond polishing tools for concrete surface preparation and polishing

  UNIT CODE :

  MSFFL3057

  Unit description :

  This unit describes the skills and knowledge required to select and fit appropriate diamond grinding and polishing tools for use in concrete floor preparation and finishing machines. It applies to concrete cleaning and polishing operations in commercial and residential environments and involves application of skills and knowledge at a sub-trade worker level.
• UNIT NAME
• Select and fit diamond polishing tools for concrete surface preparation and polishing
  

• UNIT CODE
• MSFFL3072
  Mix and apply thin-film rollcoat resin flooring systems

  UNIT CODE :

  MSFFL3072

  Unit description :

  This unit describes the skills and knowledge required to prepare and apply thin-film rollcoat resin flooring systems.
• UNIT NAME
• Mix and apply thin-film rollcoat resin flooring systems
  

• UNIT CODE
• MSFFL3100
  Apply densifiers and sealers to concrete surfaces

  UNIT CODE :

  MSFFL3100

  Unit description :

  This unit describes the skills and knowledge required to inspect and prepare concrete surfaces for polishing using densifying and sealing materials.
• UNIT NAME
• Apply densifiers and sealers to concrete surfaces
  

• UNIT CODE
• MSFFL3108
  Polish concrete floors

  UNIT CODE :

  MSFFL3108

  Unit description :

  This unit describes the skills and knowledge required to clean, prepare and polish concrete floors.
• UNIT NAME
• Polish concrete floors
  

• UNIT CODE
• MSFFL3125
  Mix and apply thin-set terrazzo

  UNIT CODE :

  MSFFL3125

  Unit description :

  This unit describes the skills and knowledge required to mix and apply thin-set terrazzo.
• UNIT NAME
• Mix and apply thin-set terrazzo
  

• UNIT CODE
• MSFFL3126
  Grout polished concrete floors

  UNIT CODE :

  MSFFL3126

  Unit description :

  This unit describes the skills and knowledge required to grout polished concrete floors.
• UNIT NAME
• Grout polished concrete floors