AUR30320

Certificate III in Automotive Electrical Technology

Complete this practical course to become a qualified automotive electrician. This course is for anyone who wants to become a qualified technician and continue their career in the automotive industry.

STUDY LOCATIONS Greater Brisbane Gold Coast Darling Downs and South West Wide Bay Burnett North Queensland

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Become a qualified automotive electrician with this course. This qualification is for anyone who wants to learn how to service, diagnose and repair electrical systems and components in vehicles in the automotive electrical service and repair industry.

According to the Australian Government's Job Outlook service, automotive electrical skills are in demand with employers finding it hard to fill vacancies for qualified automotive electricians. Queensland has the largest share of workers in this industry with stable future growth predicted over the next five years.

In this course you will gain the underpinning skills and knowledge required to service, diagnose and repair automotive electrical systems and components. You will learn how to diagnose faults and install and repair electrical systems in vehicles including lighting and wiring, ignition, instruments and warning systems. Our industry-expert teachers will also show you how to apply your knowledge of both petrol and diesel engine operation.

Successful completion of this qualification will allow you to apply for recognition as a qualified automotive electrical tradesperson.

What can I do?

Automotive Electricians
Automotive Electrical Technician

Course outcome:

AUR30320 Certificate III in Automotive Electrical Technology

Trade skills assessment and gap training program

If you can demonstrate substantial competency in this qualification, you may be able to access funding for recognition of prior learning and gap training through the Trade Skills and Assessment Gap Training (TSAGT) program. TAFE Queensland is a proud recipient of funding from the Queensland Government, Department of Employment, Small Business and Training (DESBT) for this program. Only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

Free apprenticeships for under 25s

The Queensland government is supporting young Queenslanders up to the age of 25 by providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core and 11 elective units from the list below.

UNIT CODE
UNIT NAME

UNIT CODE
AURAEA002

Follow environmental and sustainability best practice in an automotive workplace

UNIT CODE :
AURAEA002

Unit description :
This unit describes the performance outcomes required to follow environmental and sustainability best practices, including complying with established workplace procedures and environmental regulations as well as following sustainability practices that may reduce the environmental impact of work practices and outputs. It applies to those working in the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Follow environmental and sustainability best practice in an automotive workplace

UNIT CODE
AURASA102

Follow safe working practices in an automotive workplace

UNIT CODE :
AURASA102

Unit description :
This unit describes the skills and knowledge required to identify and follow safety and emergency procedures in an automotive workplace.
UNIT NAME
Follow safe working practices in an automotive workplace

UNIT CODE
AURETK002

Use and maintain electrical test equipment in an automotive workplace

UNIT CODE :
AURETK002

Unit description :
This unit describes the performance outcomes required to select, use and maintain electrical test equipment used in an automotive workplace for the purpose of identifying, diagnosing and rectifying electrical and electronic faults in vehicles or machinery. It applies to those working in the automotive service and repair industry. The electrical systems and components include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Use and maintain electrical test equipment in an automotive workplace

UNIT CODE
AURETR006

Solder electrical wiring and circuits

UNIT CODE :
AURETR006

Unit description :
This unit describes the performance outcomes required to solder electrical components, electrical circuits and system wiring. It involves preparing for the task, preparing components, circuits and wiring for soldering, carrying out soldering, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The electrical wiring and circuits include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Solder electrical wiring and circuits

UNIT CODE
AURETR007

Apply knowledge of automotive electrical circuits and wiring systems

UNIT CODE :
AURETR007

Unit description :
This unit describes the performance outcomes required to apply knowledge of electrical principles during the testing and repair of basic electrical circuits in vehicles, vessels and machinery. It applies to those working in the automotive service and repair industry. The electrical circuits and wiring systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Apply knowledge of automotive electrical circuits and wiring systems

UNIT CODE
AURETR009

Install vehicle lighting and wiring systems

UNIT CODE :
AURETR009

Unit description :
This unit describes the performance outcomes required to install vehicle, vessel or machinery low voltage (LV) direct current (DC) lighting and wiring systems that are not an integral part of vehicle or machinery controller area network databus (CAN-bus) topography. It involves preparing for the task, installing and testing the operation of lighting and wiring systems, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. LV lighting and wiring systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Install vehicle lighting and wiring systems

UNIT CODE
AURETR010

Repair wiring harnesses and looms

UNIT CODE :
AURETR010

Unit description :
This unit describes the performance outcomes required to test an existing wiring harness and loom, remove, fabricate and fit the new wiring harness and loom, and then test its operation. It involves preparing for the task, performing the work, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The wiring harnesses and looms include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Repair wiring harnesses and looms

UNIT CODE
AURETR027

Install ancillary electronic systems and components

UNIT CODE :
AURETR027

Unit description :
This unit describes the performance outcomes required to install and test ancillary electronic systems and components in vehicles or machinery. It involves preparing for the task, installing and testing the operation of the systems and components, and completing workplace processes and documentation. These electronic systems and components may require programming following installation to enable them to communicate with the vehicle or machinery controller area network data bus (CAN-bus or LIN-bus) topography.
UNIT NAME
Install ancillary electronic systems and components

UNIT CODE
AURETR112

Test and repair basic electrical circuits

UNIT CODE :
AURETR112

Unit description :
This unit describes the skills and knowledge required to inspect, test and repair basic electrical circuits in vehicle and machinery electrical systems.
UNIT NAME
Test and repair basic electrical circuits

UNIT CODE
AURETR123

Diagnose and repair spark ignition engine management systems

UNIT CODE :
AURETR123

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the spark ignition engine management systems of vehicles, vessels or machinery.
UNIT NAME
Diagnose and repair spark ignition engine management systems

UNIT CODE
AURETR124

Diagnose and repair compression ignition engine management systems

UNIT CODE :
AURETR124

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the compression ignition engine management systems of vehicles, vessels or machinery.
UNIT NAME
Diagnose and repair compression ignition engine management systems

UNIT CODE
AURETR125

Test, charge and replace batteries and jump-start vehicles

UNIT CODE :
AURETR125

Unit description :
This unit describes the skills and knowledge required to test, charge, replace, retest and secure a range of automotive batteries, including vehicle or machinery jump-starting procedures.
UNIT NAME
Test, charge and replace batteries and jump-start vehicles

UNIT CODE
AURETR128

Diagnose and repair instruments and warning systems

UNIT CODE :
AURETR128

Unit description :
This unit describes the skills and knowledge required to diagnose and repair instruments and warning systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair instruments and warning systems

UNIT CODE
AURETR129

Diagnose and repair charging systems

UNIT CODE :
AURETR129

Unit description :
This unit describes the skills and knowledge required to diagnose and repair charging systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair charging systems

UNIT CODE
AURETR130

Diagnose and repair starting systems

UNIT CODE :
AURETR130

Unit description :
This unit describes the skills and knowledge required to diagnose and repair starting systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair starting systems

UNIT CODE
AURETR131

Diagnose and repair ignition systems

UNIT CODE :
AURETR131

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the ignition systems of vehicles, vessels or machinery.
UNIT NAME
Diagnose and repair ignition systems

UNIT CODE
AURETR132

Diagnose and repair automotive electrical systems

UNIT CODE :
AURETR132

Unit description :
This unit describes the skills and knowledge required to diagnose and repair automotive electrical systems. The systems used vary based on the work context
UNIT NAME
Diagnose and repair automotive electrical systems

UNIT CODE
AURETR135

Apply knowledge of petrol and diesel engine operation

UNIT CODE :
AURETR135

Unit description :
This unit describes the skills and knowledge required to apply knowledge of petrol and diesel engine components and systems, as well as of the principles of engine operation, during the testing and repair of basic electrical circuits in vehicles, vessels and machinery.
UNIT NAME
Apply knowledge of petrol and diesel engine operation

UNIT CODE
AURETR143

Diagnose and repair electronic body management systems

UNIT CODE :
AURETR143

Unit description :
This unit describes the skills and knowledge required to diagnose and repair electronic body management systems.
UNIT NAME
Diagnose and repair electronic body management systems

UNIT CODE
AURTTA118

Develop and carry out diagnostic test strategies

UNIT CODE :
AURTTA118

Unit description :
This unit describes the skills and knowledge required to develop and carry out a diagnostic testing strategy on vehicles, vessels or machinery.
UNIT NAME
Develop and carry out diagnostic test strategies

UNIT CODE
AURTTE104

Inspect and service engines

UNIT CODE :
AURTTE104

Unit description :
This unit describes the skills and knowledge required to inspect and service engines.
UNIT NAME
Inspect and service engines

UNIT CODE
UNIT NAME

UNIT CODE
AURAFA001

Use numbers in an automotive workplace

UNIT CODE :
AURAFA001

Unit description :
This unit describes the performance outcomes required to make basic mathematical measurements and calculations relating to vehicle inspection, service and repairs. It includes undertaking calculations to inform parts and labour quotations and the completion of other automotive workplace documentation. It applies to those required to apply entry-level proficiency in numerically orientated problem-solving skills. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Use numbers in an automotive workplace

UNIT CODE
AURAFA103

Communicate effectively in an automotive workplace

UNIT CODE :
AURAFA103

Unit description :
This unit describes the skills and knowledge required to communicate in an automotive workplace. It involves communicating effectively by conveying and receiving information using verbal and non-verbal techniques and correct automotive technical terminology.
UNIT NAME
Communicate effectively in an automotive workplace

UNIT CODE
AURETB101

Diagnose and repair electric braking systems

UNIT CODE :
AURETB101

Unit description :
This unit describes the skills and knowledge required to diagnose and repair electric braking systems. These systems are single wire (non CAN-bus) circuits and include electric braking systems in light vehicles and machinery fitted with electric trailer braking controllers or trailers fitted with electric brakes. The systems used vary based on the work context. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.
UNIT NAME
Diagnose and repair electric braking systems

UNIT CODE
AURETH011

Depower and reinitialise hybrid electric vehicles

UNIT CODE :
AURETH011

Unit description :
This unit describes the performance outcomes required to depower and reinitialise hybrid electric vehicles (HEVs) and plug-in hybrid electric vehicles (PHEVs). It involves ensuring that the vehicle high voltage (HV) rechargeable energy storage system (RESS) is isolated before commencing any service or repair work. It also involves calibrating vehicle systems that may need resetting once the energy storage system is reinitialised. Importance is placed in the unit on applying RESS and separated extra low voltage (SELV) electrical safety procedures. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Depower and reinitialise hybrid electric vehicles

UNIT CODE
AURETH012

Service and maintain electrical components in hybrid electric vehicles

UNIT CODE :
AURETH012

Unit description :
This unit describes the performance outcomes required to service and maintain electrical components in hybrid electric vehicles (HEVs) and plug-in hybrid electric vehicles (PHEVs). It involves working with the automotive electrical components and electrical systems that support the control and operation of the vehicle. Importance is placed in the unit on applying high voltage (HV) rechargeable energy storage system (RESS) electrical safety procedures.

Pre-requisite unit :
AURETH011
UNIT NAME
Service and maintain electrical components in hybrid electric vehicles

UNIT CODE
AURETR008

Remove and replace electrical units and assemblies

UNIT CODE :
AURETR008

Unit description :
This unit describes the performance outcomes required to remove and replace electrical units and assemblies. Electrical units and assemblies include headlights, tail-lights, and vehicle and machinery control modules that do not require programming procedures on replacement. These electrical units and assemblies are not connected to vehicle controller area network databus (CAN-bus) topography. It applies to those working in the automotive service and repair industry. The electrical units and assemblies include those fitted to agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Remove and replace electrical units and assemblies

UNIT CODE
AURETR011

Install basic ancillary electrical systems and components

UNIT CODE :
AURETR011

Unit description :
This unit describes the performance outcomes required to install and test basic ancillary electrical systems and components in vehicles or machinery. It involves preparing for the task, installing and testing the operation of the systems and components, and completing workplace processes and documentation. These electrical systems and components will not require programming following installation as they do not communicate with the vehicle or machinery controller area network data bus (CAN-bus or LIN-bus) topography. It applies to those working in the automotive service and repair industry. Basic ancillary electrical systems and components include those being installed in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Install basic ancillary electrical systems and components

UNIT CODE
AURETR013

Inspect, test and service charging systems

UNIT CODE :
AURETR013

Unit description :
This unit describes the performance outcomes required to inspect, test and service vehicle, vessel and machinery charging systems. It involves preparing for the task, inspecting charging systems, servicing the systems, and completing workplace processes and documentation, including any associated recommendations for further action. It applies to those working in the automotive service and repair industry. The charging systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect, test and service charging systems

UNIT CODE
AURETR014

Inspect, test and service starting systems

UNIT CODE :
AURETR014

Unit description :
This unit describes the performance outcomes required to inspect, test and service vehicle, vessel and machinery starting systems. It involves preparing for the task, inspecting starting systems, servicing the systems, and completing workplace processes and documentation, including any associated recommendations for further action. It applies to those working in the automotive service and repair industry. The starting systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect, test and service starting systems

UNIT CODE
AURETR116

Read and apply vehicle wiring schematics and drawings

UNIT CODE :
AURETR116

Unit description :
This unit describes the skills and knowledge required to read and apply technical information in the wiring schematics and drawings of vehicles, vessels and machinery when testing and fault-finding electrical wiring systems. It involves preparing for the task, reading and interpreting the schematics and drawings, and completing work processes.
UNIT NAME
Read and apply vehicle wiring schematics and drawings

UNIT CODE
AURETR120

Diagnose and repair network electronic control systems

UNIT CODE :
AURETR120

Unit description :
This unit describes the skills and knowledge required to diagnose and repair network electronic control systems. These systems include two-wire high and low speed (CAN-bus) and single wire low speed (LIN-bus) networked circuits essential to control engine powertrain, vehicle dynamic control functions and body control functions. They include vehicle infotainment and climate control systems. The systems used vary based on the work context. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.
UNIT NAME
Diagnose and repair network electronic control systems

UNIT CODE
AURETR122

Diagnose and repair vehicle dynamic control systems

UNIT CODE :
AURETR122

Unit description :
This unit describes the skills and knowledge required to diagnose and repair vehicle dynamic control systems.
UNIT NAME
Diagnose and repair vehicle dynamic control systems

UNIT CODE
AURETR144

Diagnose and repair integrated engine and transmission management systems

UNIT CODE :
AURETR144

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the engine and transmission management systems of vehicles or machinery. These systems communicate on the vehicle two-wire (CAN-bus) networked controlled circuit and are an integral part of an engine and transmission management system.
UNIT NAME
Diagnose and repair integrated engine and transmission management systems

UNIT CODE
AURETU102

Recover vehicle refrigerants

UNIT CODE :
AURETU102

Unit description :
This unit describes the skills and knowledge required to recover vehicle air conditioner refrigerants in designated recovery cylinders for disposal according to safety and environmental procedures while observing critical precautions, given that refrigerant may be flammable.
UNIT NAME
Recover vehicle refrigerants

UNIT CODE
AURETU103

Service air conditioning and HVAC systems

UNIT CODE :
AURETU103

Unit description :
This unit describes the skills and knowledge required to service air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery.
UNIT NAME
Service air conditioning and HVAC systems

UNIT CODE
AURETU104

Diagnose and repair air conditioning and HVAC components

UNIT CODE :
AURETU104

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery for passenger convenience and comfort. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair air conditioning and HVAC components

UNIT CODE
AURTTA104

Carry out servicing operations

UNIT CODE :
AURTTA104

Unit description :
This unit describes the skills and knowledge required to carry out servicing operations.
UNIT NAME
Carry out servicing operations

UNIT CODE
AURTTA105

Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE :
AURTTA105

Unit description :
This unit describes the skills and knowledge required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry.
UNIT NAME
Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE
AURTTB101

Inspect and service braking systems

UNIT CODE :
AURTTB101

Unit description :
This unit describes the skills and knowledge required to inspect and service braking systems according to manufacturer specifications.
UNIT NAME
Inspect and service braking systems

UNIT CODE
AURTTC001

Inspect and service cooling systems

UNIT CODE :
AURTTC001

Unit description :
This unit describes the performance outcomes required to inspect and service air and liquid cooling systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, reporting the inspection findings, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The cooling systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycle or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service cooling systems

UNIT CODE
AURTTC103

Diagnose and repair cooling systems

UNIT CODE :
AURTTC103

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the cooling systems of vehicles. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair cooling systems

UNIT CODE
AURTTF101

Inspect and service petrol fuel systems

UNIT CODE :
AURTTF101

Unit description :
This unit describes the skills and knowledge required to inspect and service vehicle petrol fuel systems.
UNIT NAME
Inspect and service petrol fuel systems

UNIT CODE
AURTTK001

Use and maintain measuring equipment in an automotive workplace

UNIT CODE :
AURTTK001

Unit description :
This unit describes the performance outcomes required to select, use, maintain and store automotive measuring equipment. It involves selecting and maintaining measuring equipment, and using measuring equipment to determine length, width, angles, ovality, depth, out of square, clearances, run-out, pressure and temperature of automotive components and materials. It applies to those working in all sectors of the automotive industry. This unit does not apply to electrical measuring equipment that measures voltage, resistance or current flow. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Use and maintain measuring equipment in an automotive workplace

UNIT CODE
AURTTK102

Use and maintain tools and equipment in an automotive workplace

UNIT CODE :
AURTTK102

Unit description :
This unit describes the skills and knowledge required to select, use, maintain and store tools and equipment in an automotive workplace.
UNIT NAME
Use and maintain tools and equipment in an automotive workplace

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Ipswich	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Ashmore	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Toowoomba	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Bundaberg	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Mount Isa	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Cairns	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Townsville - Trade Training Centre Bohle	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Automotive Electrical Technology (AUR30320)

Ask a question

Certificate III in Automotive Electrical Technology

COURSE CODE: AUR30320

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

clear safety glasses to AS 1336 or 1337
protective footwear with safety toe cap and non-slip soles to AS2210
mechanic gloves
ear plugs or muffs
You should also wear 100% cotton drill industry-standard protective clothing

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

You will be provided with a recommended reading list and/or required textbooks after enrolment, during orientation or at the start of each unit. The purchase of these resources may incur additional costs, or you may be able to borrow them from the TAFE Queensland library network.

You are also required to have access to and bring personal stationary, a USB, and a calculator.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate III in Light Vehicle Mechanical Technology

This practical course will put you on the path to becoming a qualified light vehicle mechanic.

Careers

Light Vehicle Mechanic

Full Time : 21 months

Next Start : 28 Jan 2025

Certificate II in Automotive Air Conditioning Technology

Gain your refrigerant handling licence. This course is for existing automotive tradespeople who want to further their career.

Careers

Automotive Air Conditioning Serviceperson

Full Time : 4 days

Next Start : 02 Dec 2024

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Automotive Electrical Technology

Course overview

What can I do?

Course outcome:

Trade skills assessment and gap training program

Free apprenticeships for under 25s

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Automotive Electrical Technology

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Selection criteria

Resources required

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate III in Light Vehicle Mechanical Technology

Careers

Certificate II in Automotive Air Conditioning Technology

Careers