CPC30220 | CRICOS: 104863K

Certificate III in Carpentry

Progress your career in the construction industry with this course. Completion of this carpentry qualification gives you the opportunity to become a recognised tradesperson.

Apply now

STUDY LOCATIONS Greater Brisbane Gold Coast Sunshine Coast Darling Downs and South West Wide Bay Burnett North Queensland

WAYS TO STUDY Apprenticeships and traineeships International

NEXT INTAKE Start date: 28 Jan 2025 Duration: 2 years View all intakes

WHAT YOU'LL PAY

International

$26,000

Course overview

Gain the skills and knowledge required to work as carpenter in the building and construction industry. According to the Australian Government's Job Outlook service, carpentry skills are in demand with employers finding it hard to fill vacancies for qualified carpenters and joiners. This is a very large occupation with around 69,000 job openings expected over the next five years.

In this course, you'll learn how to construct, install, finish and repair structures and fixtures for residential, commercial and industrial developments. You will work with a range of tools, equipment and materials to construct frames for walls and ceilings, construct pitched and advanced roofs and eaves, and erect and dismantle formwork for footings and slabs on the ground.

This course, delivered by our highly experienced and passionate teachers, will see you graduate with the skills that will allow you to become a qualified carpenter or joiner.

What can I do?

Carpenter and Joiner

Course outcome:

CPC30220 Certificate III in Carpentry

Construction Skills Queensland (CSQ) Funding

TAFE Queensland is a proud recipient of Construction Skills Queensland (CSQ) funding and is a registered provider in the CSQ Skills Assessment and Gap Training program and the Registered Trade Skills Pathway program – this course is subsidised under these programs. It is important to note only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

Free apprenticeships

The Queensland Government is providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications to support Queenslanders. Eligible qualifications have been chosen based on skills demand and advice from industry. If you’re eligible for funding, your course costs will be covered by the state government. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core and 7 elective units from the list below.

International students only:
You will also be required to undertake 400 hours of vocational placement in an approved setting.

UNIT CODE
UNIT NAME

UNIT CODE
CPCCCA2002

Use carpentry tools and equipment

UNIT CODE :
CPCCCA2002

Unit description :
This unit of competency specifies the skills and knowledge required to select and safely use and maintain carpentry tools and equipment, meeting all relevant requirements of national construction codes, Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Use carpentry tools and equipment

UNIT CODE
CPCCCA2011

Handle carpentry materials

UNIT CODE :
CPCCCA2011

Unit description :
This unit of competency specifies the skills and knowledge required to safely manually handle and store carpentry materials, meeting all relevant requirements of work health and safety (WHS) and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Handle carpentry materials

UNIT CODE
CPCCCA3001

Carry out general demolition of minor building structures

UNIT CODE :
CPCCCA3001

Unit description :
This unit of competency specifies the skills and knowledge required to carry out general demolition work of minor building structures to facilitate alterations, extensions and additions to a building in residential and commercial sites.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out general demolition of minor building structures

UNIT CODE
CPCCCA3002

Carry out setting out

UNIT CODE :
CPCCCA3002

Unit description :
This unit of competency specifies the skills and knowledge required to identify perimeter site boundaries and survey indicators to establish, measure and set up profiled set-outs for buildings and structural components of building work, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out setting out

UNIT CODE
CPCCCA3003

Install flooring systems

UNIT CODE :
CPCCCA3003

Unit description :
This unit of competency specifies the skills and knowledge required to plan, prepare, set out and install timber and steel flooring systems to support the internal and external walls of a residential building, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation and National Association of Steel-Framed Housing (NASH) standard for steel-framed construction in bushfire areas.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install flooring systems

UNIT CODE
CPCCCA3004

Construct and erect wall frames

UNIT CODE :
CPCCCA3004

Unit description :
This unit of competency specifies the skills and knowledge required to plan, prepare, set out, construct and erect load-bearing and non-load-bearing wall frames for the different types of loadings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct and erect wall frames

UNIT CODE
CPCCCA3005

Construct ceiling frames

UNIT CODE :
CPCCCA3005

Unit description :
This unit of competency specifies the skills and knowledge required to plan, prepare, set-out, construct and erect timber ceiling frames to accommodate ceiling joists, hanging beams, strutting beams, combined hanging/strutting beams, and combined strutting/counter beams, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct ceiling frames

UNIT CODE
CPCCCA3006

Erect roof trusses

UNIT CODE :
CPCCCA3006

Unit description :
This unit of competency specifies the skills and knowledge required to select, set out, erect and brace timber and steel roof trusses in preparation for the installation of waterproof roof coverings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, National Association of Steel-framed Housing (NASH) Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Erect roof trusses

UNIT CODE
CPCCCA3007

Construct pitched roofs

UNIT CODE :
CPCCCA3007

Unit description :
This unit of competency specifies the skills and knowledge required to set out, construct and erect pitched roofs to accommodate roof coverings for weatherproofing purposes, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct pitched roofs

UNIT CODE
CPCCCA3008

Construct eaves

UNIT CODE :
CPCCCA3008

Unit description :
This unit of competency specifies the skills and knowledge required to prepare, set out and construct eaves, including the cutting and fixing of fascia and barges to provide a finish between the wall and the roof, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct eaves

UNIT CODE
CPCCCA3010

Install windows and doors

UNIT CODE :
CPCCCA3010

Unit description :
This unit of competency specifies the skills and knowledge required to plan, prepare and install window and door units, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install windows and doors

UNIT CODE
CPCCCA3016

Construct, assemble and install timber external stairs

UNIT CODE :
CPCCCA3016

Unit description :
This unit of competency specifies the skills and knowledge required to construct, assemble and install timber external stairs of one or more flights to provide access into a building or structure, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct, assemble and install timber external stairs

UNIT CODE
CPCCCA3017

Install exterior cladding

UNIT CODE :
CPCCCA3017

Unit description :
This unit of competency specifies the skills and knowledge required to apply material finishes to an external framed wall surface for the purpose of weatherproofing and securing the building, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install exterior cladding

UNIT CODE
CPCCCA3024

Install lining, panelling and moulding

UNIT CODE :
CPCCCA3024

Unit description :
This unit of competency specifies the skills and knowledge required to prepare, set out and install lining and panelling to masonry and timber and/or metal framed walls, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install lining, panelling and moulding

UNIT CODE
CPCCCA3025

Read and interpret plans, specifications and drawings for carpentry work

UNIT CODE :
CPCCCA3025

Unit description :
This unit of competency specifies the skills and knowledge required to read and interpret plans and specifications for carpentry work in order to plan and sequence the work, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Read and interpret plans, specifications and drawings for carpentry work

UNIT CODE
CPCCCA3028

Erect and dismantle formwork for footings and slabs on ground

UNIT CODE :
CPCCCA3028

Unit description :
This unit of competency specifies the skills and knowledge required to erect and dismantle formwork for slabs on ground, rebates to slabs on ground, and steps to strip footings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Erect and dismantle formwork for footings and slabs on ground

UNIT CODE
CPCCCM2006

Apply basic levelling procedures

UNIT CODE :
CPCCCM2006

Unit description :
This unit of competency specifies the outcomes required to carry out levelling in a single plane for the purpose of establishing correct and accurate set-out of building components. It includes the set-up, testing and use of levelling devices, and establishing and transferring heights using a range of levelling equipment. The unit supports workers in the construction industry who use a variety of common methods and equipment when working with others and as a member of a team. It applies to levelling work on residential and commercial work sites.

Pre-requisite unit :
CPCCWHS2001 , CPCCWHS2001 , CPCCWHS2001
UNIT NAME
Apply basic levelling procedures

UNIT CODE
CPCCCM2008

Erect and dismantle restricted height scaffolding

UNIT CODE :
CPCCCM2008

Unit description :
This unit specifies the skills and knowledge required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Erect and dismantle restricted height scaffolding

UNIT CODE
CPCCCM2012

Work safely at heights

UNIT CODE :
CPCCCM2012

Unit description :
This unit specifies the skills and knowledge required to work safely on construction sites where the worker has the potential to fall from one level to another.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Work safely at heights

UNIT CODE
CPCCCO2013

Carry out concreting to simple forms

UNIT CODE :
CPCCCO2013

Unit description :
This unit of competency specifies the skills and knowledge required to safely install formwork, reinforcement and place and finish concrete for the construction of minor slabs, pathways and other minor works to a specified design finish, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out concreting to simple forms

UNIT CODE
CPCCOM1012

Work effectively and sustainably in the construction industry

UNIT CODE :
CPCCOM1012

Unit description :
This unit of competency specifies the skills and knowledge required to work effectively and sustainably in the construction industry.
UNIT NAME
Work effectively and sustainably in the construction industry

UNIT CODE
CPCCOM1014

Conduct workplace communication

UNIT CODE :
CPCCOM1014

Unit description :
This unit of competency specifies the skills and knowledge required to communicate effectively with other workers in a construction workplace environment.
UNIT NAME
Conduct workplace communication

UNIT CODE
CPCCOM1015

Carry out measurements and calculations

UNIT CODE :
CPCCOM1015

Unit description :
This unit of competency specifies the skills and knowledge required to undertake basic measurements and calculations to determine task and material requirements in a construction work environment.
UNIT NAME
Carry out measurements and calculations

UNIT CODE
CPCCOM3001

Perform construction calculations to determine carpentry material requirements

UNIT CODE :
CPCCOM3001

Unit description :
This unit of competency specifies the skills and knowledge required to plan and perform calculations to determine material requirements for a construction project.
UNIT NAME
Perform construction calculations to determine carpentry material requirements

UNIT CODE
CPCCOM3006

Carry out levelling operations

UNIT CODE :
CPCCOM3006

Unit description :
This unit of competency specifies the skills and knowledge required to carry out levelling operations to establish correct and accurate set-out of buildings and components, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.
UNIT NAME
Carry out levelling operations

UNIT CODE
CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

UNIT CODE :
CPCCWHS2001

Unit description :
This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces.
UNIT NAME
Apply WHS requirements, policies and procedures in the construction industry

UNIT CODE
CPCWHS3001

Identify construction work hazards and select risk control strategies

UNIT CODE :
CPCWHS3001

Unit description :
This unit of competency specifies the skills and knowledge required to participate in preparing a job safety analysis (JSA) for general hazards, and a safe work method statement (SWMS) for high risk work hazards on construction sites as specified in work health and safety (WHS) legislation.
UNIT NAME
Identify construction work hazards and select risk control strategies

UNIT CODE
UNIT NAME

UNIT CODE
CPCCCA3012

Frame and fit wet area fixtures

UNIT CODE :
CPCCCA3012

Unit description :
This unit of competency specifies the skills and knowledge required to install supporting framework for fixtures and flashings for wet area construction of a bath, shower base, and prepare for wet area linings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Frame and fit wet area fixtures

UNIT CODE
CPCCCA3014

Construct and install bulkheads

UNIT CODE :
CPCCCA3014

Unit description :
This unit of competency specifies the skills and knowledge required to construct bulkheads for decorative purposes, to contain fittings, such as range hoods and cupboards, to conceal services, and to help facilitate changes in ceiling heights, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct and install bulkheads

UNIT CODE
CPCCCA3018

Construct, erect and dismantle formwork for stairs and ramps

UNIT CODE :
CPCCCA3018

Unit description :
This unit of competency specifies the skills and knowledge required to construct, erect and dismantle formwork for stairs and ramps to provide access between floors and landings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Construct, erect and dismantle formwork for stairs and ramps

UNIT CODE
CPCCCA3026

Assemble partitions

UNIT CODE :
CPCCCA3026

Unit description :
This unit of competency specifies the skills and knowledge required to set out and assemble partitions for the purpose of dividing areas into useable spaces, meeting all relevant requirements of national construction codes, Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Assemble partitions

UNIT CODE
CPCCCA3027

Set up, operate and maintain indirect action powder-actuated power tools

UNIT CODE :
CPCCCA3027

Unit description :
This unit of competency specifies the skills and knowledge required to set-up, operate and maintain powder-actuated power tools safely and effectively to fasten materials or fix fasteners to bases, meeting all relevant requirements of work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Set up, operate and maintain indirect action powder-actuated power tools

UNIT CODE
CPCCCM2002

Carry out hand excavation

UNIT CODE :
CPCCCM2002

Unit description :
This unit of competency specifies the skills and knowledge required to undertake hand excavation tasks to form excavations for footings and the provision of services.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out hand excavation

UNIT CODE
CPCCCM3001

Operate elevated work platforms up to 11 metres

UNIT CODE :
CPCCCM3001

Unit description :
This unit of competency specifies the outcomes required to operate specific types of elevated work platforms (EWPs) safely and effectively in different locations, including on uneven terrain.
UNIT NAME
Operate elevated work platforms up to 11 metres

UNIT CODE
CPCCCM3005

Calculate costs of construction work

UNIT CODE :
CPCCCM3005

Unit description :
This unit of competency specifies the outcomes required to estimate materials, overheads, labour and time requirements and establish costs for the provision of products and services for construction work.
UNIT NAME
Calculate costs of construction work

UNIT CODE
CPCCOM1013

Plan and organise work

UNIT CODE :
CPCCOM1013

Unit description :
This unit of competency specifies the skills and knowledge required to plan and organise basic work tasks on a construction site.
UNIT NAME
Plan and organise work

UNIT CODE
CPCCSF2004

Place and fix reinforcement materials

UNIT CODE :
CPCCSF2004

Unit description :
This unit of competency specifies the skills and knowledge required to place and fix reinforcement for concrete work as part of construction processes

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Place and fix reinforcement materials

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Alexandra Hills	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Bracken Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Ipswich	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Ashmore	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Nambour	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Roma	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Toowoomba	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Charleville	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Kingaroy	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Bundaberg	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Hervey Bay	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Mount Isa	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Cairns	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Thursday Island	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Townsville - Trade Training Centre Bohle	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

Choose your study location

On Campus

You'll learn face to face with a teacher in a classroom or simulated workplace environment. You may access learning materials through our online learning management system Connect. Learn more
View comparison chart

On Campus

You'll learn face to face with a teacher in a classroom or simulated workplace environment. You may access learning materials through our online learning management system Connect. Learn more
View comparison chart

On Campus

You'll learn face to face with a teacher in a classroom or simulated workplace environment. You may access learning materials through our online learning management system Connect. Learn more
View comparison chart

CAMPUS	STUDY MODE	START DATE	DURATION	WORKLOAD	WHAT YOU'LL PAY
Acacia Ridge	On Campus	28 Jan 2025	2 years	Full time 3 days per week	International: $26,000 This is the total course fee for international students. Learn more More Apply
Acacia Ridge On Campus Online Time How much of the course will be delivered online. 0% On Campus Time 100% START DATE The date the course starts. Apply early as intakes fill up quickly. 28 Jan 2025 The date the course starts. Apply early as intakes fill up quickly. DURATION The total length of time it takes to complete the course. 2 years The total length of time it takes to complete the course. Workload The average amount of time students will need to allocate to study each week. Full time 3 days per week The average amount of time students will need to allocate to study each week. WHAT YOU'LL PAY International: $26,000 This is the total course fee for international students. Learn more Class format Some courses include classes at scheduled times while others can be completed in your own time. Teacher-led, Scheduled Some courses include classes at scheduled times while others can be completed in your own time. VIRTUAL CLASS Scheduled online classes using video conferencing software (such as Zoom). No Scheduled online classes using video conferencing software (such as Zoom). ASSESSMENT The primary location assessments will take place. Some courses also require vocational placement. On-Campus and vocational placement The primary location assessments will take place. Some courses also require vocational placement. TEACHER COMMS The different ways you can contact your teacher throughout the course. Phone, Email, Face-to-face, Zoom The different ways you can contact your teacher throughout the course. Less Ask a question Apply
Acacia Ridge	On Campus	14 Jul 2025	2 years	Full time 3 days per week	International: $26,000 This is the total course fee for international students. Learn more More Apply
Acacia Ridge On Campus Online Time How much of the course will be delivered online. 0% On Campus Time 100% START DATE The date the course starts. Apply early as intakes fill up quickly. 14 Jul 2025 The date the course starts. Apply early as intakes fill up quickly. DURATION The total length of time it takes to complete the course. 2 years The total length of time it takes to complete the course. Workload The average amount of time students will need to allocate to study each week. Full time 3 days per week The average amount of time students will need to allocate to study each week. WHAT YOU'LL PAY International: $26,000 This is the total course fee for international students. Learn more Class format Some courses include classes at scheduled times while others can be completed in your own time. Teacher-led, Scheduled Some courses include classes at scheduled times while others can be completed in your own time. VIRTUAL CLASS Scheduled online classes using video conferencing software (such as Zoom). No Scheduled online classes using video conferencing software (such as Zoom). ASSESSMENT The primary location assessments will take place. Some courses also require vocational placement. On-Campus and vocational placement The primary location assessments will take place. Some courses also require vocational placement. TEACHER COMMS The different ways you can contact your teacher throughout the course. Phone, Email, Face-to-face, Zoom The different ways you can contact your teacher throughout the course. Less Ask a question Apply

CAMPUS	STUDY MODE	START DATE	DURATION	WORKLOAD	WHAT YOU'LL PAY
Ashmore	On Campus	28 Jan 2025	2 years	Full time 3 days per week	International: $26,000 This is the total course fee for international students. Learn more More Apply
Ashmore On Campus Online Time How much of the course will be delivered online. 0% On Campus Time 100% START DATE The date the course starts. Apply early as intakes fill up quickly. 28 Jan 2025 The date the course starts. Apply early as intakes fill up quickly. DURATION The total length of time it takes to complete the course. 2 years The total length of time it takes to complete the course. Workload The average amount of time students will need to allocate to study each week. Full time 3 days per week The average amount of time students will need to allocate to study each week. WHAT YOU'LL PAY International: $26,000 This is the total course fee for international students. Learn more Class format Some courses include classes at scheduled times while others can be completed in your own time. Teacher-led, Scheduled Some courses include classes at scheduled times while others can be completed in your own time. VIRTUAL CLASS Scheduled online classes using video conferencing software (such as Zoom). No Scheduled online classes using video conferencing software (such as Zoom). ASSESSMENT The primary location assessments will take place. Some courses also require vocational placement. On-Campus and vocational placement The primary location assessments will take place. Some courses also require vocational placement. TEACHER COMMS The different ways you can contact your teacher throughout the course. Phone, Email, Face-to-face, Zoom The different ways you can contact your teacher throughout the course. Less Ask a question Apply
Ashmore	On Campus	14 Jul 2025	2 years	Full time 3 days per week	International: $26,000 This is the total course fee for international students. Learn more More Apply
Ashmore On Campus Online Time How much of the course will be delivered online. 0% On Campus Time 100% START DATE The date the course starts. Apply early as intakes fill up quickly. 14 Jul 2025 The date the course starts. Apply early as intakes fill up quickly. DURATION The total length of time it takes to complete the course. 2 years The total length of time it takes to complete the course. Workload The average amount of time students will need to allocate to study each week. Full time 3 days per week The average amount of time students will need to allocate to study each week. WHAT YOU'LL PAY International: $26,000 This is the total course fee for international students. Learn more Class format Some courses include classes at scheduled times while others can be completed in your own time. Teacher-led, Scheduled Some courses include classes at scheduled times while others can be completed in your own time. VIRTUAL CLASS Scheduled online classes using video conferencing software (such as Zoom). No Scheduled online classes using video conferencing software (such as Zoom). ASSESSMENT The primary location assessments will take place. Some courses also require vocational placement. On-Campus and vocational placement The primary location assessments will take place. Some courses also require vocational placement. TEACHER COMMS The different ways you can contact your teacher throughout the course. Phone, Email, Face-to-face, Zoom The different ways you can contact your teacher throughout the course. Less Ask a question Apply

CAMPUS	STUDY MODE	START DATE	DURATION	WORKLOAD	WHAT YOU'LL PAY
Nambour	On Campus	28 Jan 2025	2 years	Full time 3 days per week	International: $26,000 This is the total course fee for international students. Learn more More Apply
Nambour On Campus Online Time How much of the course will be delivered online. 0% On Campus Time 100% START DATE The date the course starts. Apply early as intakes fill up quickly. 28 Jan 2025 The date the course starts. Apply early as intakes fill up quickly. DURATION The total length of time it takes to complete the course. 2 years The total length of time it takes to complete the course. Workload The average amount of time students will need to allocate to study each week. Full time 3 days per week The average amount of time students will need to allocate to study each week. WHAT YOU'LL PAY International: $26,000 This is the total course fee for international students. Learn more Class format Some courses include classes at scheduled times while others can be completed in your own time. Teacher-led, Scheduled Some courses include classes at scheduled times while others can be completed in your own time. VIRTUAL CLASS Scheduled online classes using video conferencing software (such as Zoom). No Scheduled online classes using video conferencing software (such as Zoom). ASSESSMENT The primary location assessments will take place. Some courses also require vocational placement. On-Campus and vocational placement The primary location assessments will take place. Some courses also require vocational placement. TEACHER COMMS The different ways you can contact your teacher throughout the course. Phone, Email, Face-to-face, Zoom The different ways you can contact your teacher throughout the course. Less Ask a question Apply
Nambour	On Campus	14 Jul 2025	2 years	Full time 3 days per week	International: $26,000 This is the total course fee for international students. Learn more More Apply
Nambour On Campus Online Time How much of the course will be delivered online. 0% On Campus Time 100% START DATE The date the course starts. Apply early as intakes fill up quickly. 14 Jul 2025 The date the course starts. Apply early as intakes fill up quickly. DURATION The total length of time it takes to complete the course. 2 years The total length of time it takes to complete the course. Workload The average amount of time students will need to allocate to study each week. Full time 3 days per week The average amount of time students will need to allocate to study each week. WHAT YOU'LL PAY International: $26,000 This is the total course fee for international students. Learn more Class format Some courses include classes at scheduled times while others can be completed in your own time. Teacher-led, Scheduled Some courses include classes at scheduled times while others can be completed in your own time. VIRTUAL CLASS Scheduled online classes using video conferencing software (such as Zoom). No Scheduled online classes using video conferencing software (such as Zoom). ASSESSMENT The primary location assessments will take place. Some courses also require vocational placement. On-Campus and vocational placement The primary location assessments will take place. Some courses also require vocational placement. TEACHER COMMS The different ways you can contact your teacher throughout the course. Phone, Email, Face-to-face, Zoom The different ways you can contact your teacher throughout the course. Less Ask a question Apply

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

As an international student at TAFE Queensland you'll gain hands-on experience in our modern classrooms, laboratories and workshops using state-of-the-art facilities and the same tools and equipment used in industry.

Get the internationally-recognised qualification you need to launch your career while enjoying the unique Australian landscape, culture, and lifestyle.

No matter where you are in your study journey, our team of international student support advisors can help you settle into life in Australia and provide support and assistance to help you throughout your studies.

As an international student you’ll study face-to-face in a classroom with other international and Australian students at one of our campus locations.

You will be expected to undertake additional personal study to complete the course requirements. The number of hours of personal study required is dependent on your existing knowledge, skills and language needs.

Download Brochure

Certificate III in Carpentry (CPC30220)

Ask a question

Certificate III in Carpentry

COURSE CODE: CPC30220

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

International student payment

Our preferred payment method is telegraphic transfer or credit card using Convera Global Pay for Students or the Flywire Payment Portal. Convera and Flywire both allow you to complete your payment in your own currency using a telegraphic transfer with no processing fees or delays.
Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

Domestic students
The following selection criteria requirements apply only to domestic students:

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

International students
The following selection criteria requirements apply only to international students:

English Language Proficiency: Academic IELTS 6.0 (no individual band less than 5.5) or equivalent - For a list of all English Language tests accepted by TAFE Queensland International.
Academic Requirements: Completion of Year 10 (or equivalent). Non school-leavers must have relevant work experience or qualification that indicates likely success of course completion. For more information on the international education achievement levels equivalent to Year 10.

Applicants should be a minimum of 17 years of age and turning 18 during the first year of study with TAFE Queensland. International students who are under 18 years of age and are applying for a student visa are required by the Australian Department of Home Affairs to have adequate welfare arrangements in place.

Resources required

Domestic students
You are responsible for meeting the minimum occupational health and safety requirements in practical classes.

This includes the use of:

safety glasses
protective footwear with safety toe cap and non-slip soles to AS2210
leather gloves to AS2161
hair protection
disposable dust masks
You should also wear 100% cotton drill industry-standard clothing.

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

You will be provided with a recommended reading list and/or required textbooks during orientation or at the start of each unit. The purchase of these resources may incur additional costs, or you may be able to borrow them from the TAFE Queensland library network.

You are also required to have access to and bring personal stationery, a USB, a calculator, and tools/equipment including a folding metre ruler (carpenter) and a 5m tape measure.

International students
It is recommended that students have access to a reliable internet connection to access TAFE Queensland's online learning system Connect and a computer with up-to-date software, including Microsoft Office and Adobe Acrobat Reader. This equipment and software is available for students to use at all TAFE Queensland locations.

All students must have the following items on their first day of class attendance (included in course fees at Ashmore campus):

Personal protection equipment:

Safety footwear (AS2210)
Clear safety glasses (AS1337)
Hearing protection (AS1270)
Protective clothing (shirt and pants)

Students failing to meet these minimum standards of dress will not be permitted entry in to practical classes.

The following materials are not included in the course fees at either campus.

Materials list:

Nail bag, hammer and basic tools
8m tape
Carpenters pencils
Soft eraser
Biro pens
A4 notebook
Calculator (square root function required)

Courses may require different resources depending on your study location.

Placement

International students
You will be required to undertake 400 hours of vocational placement in an approved setting. TAFE Queensland will coordinate and source this for you, and you will be provided with all the information you need to prepare.

Please note: completing placement is compulsory, and you will be expected to manage family and work commitments in order to complete your shifts. You are responsible for ensuring you have met all the requirements to participate in vocational placement, and are required to make your own transport arrangements to and from your vocational placement approved setting.

Confidentiality
During these placements, you may become familiar with information that is confidential to that workplace (for example financial or business affairs, personal affairs and family background of staff and clients, technical information, trade secrets, know-how, formulae, processes, ideas, and inventions). You must not divulge any confidential information that you become aware of during a placement. Breaches of confidentiality will be considered to be acts of behavioural misconduct and may result in disciplinary action.

Important information

All students must hold a valid White Card or complete unit CPCWHS1001 Prepare to work safely in the construction industry (White Card). This is a legislative requirement for entry onto any Queensland construction work site.

If you DO NOT currently hold a White Card, some TAFE Queensland locations deliver this unit as part of this course. If your chosen location does not offer this unit as part of the course please contact the Customer Service Centre for information on how to complete this unit at an additional cost.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

For International students

International students can either apply directly through our TAFE Queensland International Application portal, or through one of our education agents. Our registered agents can assist you with your visa application and guide you through the enrolment process. If you are from this list of countries, you will need to apply through an agent.
Learn more

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate IV in Building and Construction

Take your building business to the next level by completing this qualification with TAFE Queensland. This course is perfect for builders or owners of small to medium-sized building businesses.

Careers

Builder
Construction Supervisor
Construction Managers
Site Manager
Site Supervisor

Part Time : 1 year

Next Start : 28 Jan 2025

Diploma of Building and Construction (Building)

Advance your building and construction management career with this technical qualification. This course meets the technical requirements for a Builder Low or Medium Rise licence in Queensland.

Careers

Construction Contract Manager
Builder
Construction Project Manager
Site Supervisor

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Carpentry

Course overview

What can I do?

Course outcome:

Construction Skills Queensland (CSQ) Funding

Free apprenticeships

Core units

Elective units

Acacia Ridge

Acacia Ridge

Ashmore

Ashmore

Nambour

Nambour

Download Brochure

Ask a question

Certificate III in Carpentry

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

International student payment

Entry requirements

Selection criteria

Resources required

Placement

Important information

Assessment methods

Pathways

University pathways

How to apply

Direct application

For International students

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate IV in Building and Construction

Careers

Diploma of Building and Construction (Building)

Careers