CPC32620

Certificate III in Roof Plumbing

Become a qualified roof plumber with this apprenticeship course from TAFE Queensland. Progress your career in the plumbing industry by becoming a recognised tradesperson.

STUDY LOCATIONS Greater Brisbane Gold Coast North Queensland

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Complete this course as part of your apprenticeship to become a trade-qualified roof plumber. According to the Australian Government's Job Outlook service, plumbing is a skill in demand with employers finding it hard to fill vacancies. The industry grew strongly over the past five years and is expected to continue to expand with around 29,000 job openings anticipated over the next five years.

In this course you will consolidate your skills in installation of roof sheeting, wall cladding, non-metallic roof materials and insulation for a roof. You will learn how to install fascias, gutters, downpipes, valley gutters, ridge capping, flashings and wall cladding. Our industry-qualified, expert teachers will ensure you can carry out these tasks to the high standards demanded in the industry.

Successful completion of this apprenticeship course will allow you to apply to become a qualified roof plumber and continue to progress your career in the construction industry.

What can I do?

Roof Plumber

Course outcome:

CPC32620 Certificate III in Roof Plumbing

Free apprenticeships

The Queensland Government is providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications to support Queenslanders. Eligible qualifications have been chosen based on skills demand and advice from industry. If you’re eligible for funding, your course costs will be covered by the state government. Learn more>

Construction Skills Queensland (CSQ) Funding

TAFE Queensland is a proud recipient of Construction Skills Queensland (CSQ) funding and is a registered provider in the CSQ Skills Assessment and Gap Training program – this course is subsidised under this program. It is important to note only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

What you will study

The successful achievement of this qualification requires you to complete all core and 3 elective units from the list below.

UNIT CODE
UNIT NAME

UNIT CODE
CPCCCM2008

Erect and dismantle restricted height scaffolding

UNIT CODE :
CPCCCM2008

Unit description :
This unit specifies the skills and knowledge required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Erect and dismantle restricted height scaffolding

UNIT CODE
CPCCCM2012

Work safely at heights

UNIT CODE :
CPCCCM2012

Unit description :
This unit specifies the skills and knowledge required to work safely on construction sites where the worker has the potential to fall from one level to another.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Work safely at heights

UNIT CODE
CPCCCM3001

Operate elevated work platforms up to 11 metres

UNIT CODE :
CPCCCM3001

Unit description :
This unit of competency specifies the outcomes required to operate specific types of elevated work platforms (EWPs) safely and effectively in different locations, including on uneven terrain.
UNIT NAME
Operate elevated work platforms up to 11 metres

UNIT CODE
CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

UNIT CODE :
CPCCWHS2001

Unit description :
This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces.
UNIT NAME
Apply WHS requirements, policies and procedures in the construction industry

UNIT CODE
CPCPCM2040

Read plans, calculate quantities and mark out materials

UNIT CODE :
CPCPCM2040

Unit description :
This unit specifies the skills and knowledge required to read and interpret construction and plumbing plans and specifications and obtain dimensions to calculate material quantities and mark out materials.

Pre-requisite unit :
CPCPCM2043 , CPCPCM3024
UNIT NAME
Read plans, calculate quantities and mark out materials

UNIT CODE
CPCPCM2041

Work effectively in the plumbing services sector

UNIT CODE :
CPCPCM2041

Unit description :
This unit specifies the skills and knowledge required to comply with effective workplace performance within the plumbing and services sector.
UNIT NAME
Work effectively in the plumbing services sector

UNIT CODE
CPCPCM2043

Carry out WHS requirements

UNIT CODE :
CPCPCM2043

Unit description :
This unit specifies the skills and knowledge required to carry out work health and safety (WHS) requirements in a plumbing and services work environment.
UNIT NAME
Carry out WHS requirements

UNIT CODE
CPCPCM2047

Carry out levelling

UNIT CODE :
CPCPCM2047

Unit description :
This unit specifies the skills and knowledge required to plan and use levelling equipment.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Carry out levelling

UNIT CODE
CPCPCM2048

Cut and join sheet metal

UNIT CODE :
CPCPCM2048

Unit description :
This unit specifies the skills and knowledge required to cut and join sheet metal in the plumbing and services industry.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Cut and join sheet metal

UNIT CODE
CPCPCM2055

Work safely on roofs

UNIT CODE :
CPCPCM2055

Unit description :
This unit specifies the skills and knowledge required to work safely on roofing structures.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Work safely on roofs

UNIT CODE
CPCPCM3021

Flash penetrations through roofs and walls

UNIT CODE :
CPCPCM3021

Unit description :
This unit specifies the skills and knowledge required to set out, cut and flash roof and wall penetrations.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Flash penetrations through roofs and walls

UNIT CODE
CPCPCM3024

Prepare simple drawings

UNIT CODE :
CPCPCM3024

Unit description :
This unit specifies the skills and knowledge required to produce onsite drawings for plumbing services work.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Prepare simple drawings

UNIT CODE
CPCPRF2022

Select and install roof sheeting and wall cladding

UNIT CODE :
CPCPRF2022

Unit description :
This unit specifies the skills and knowledge to select and install insulation, roof battens and wall cladding involving metallic, non-metallic or other approved roof covering materials.

Pre-requisite unit :
CPCPCM2043 , CPCPCM2055
UNIT NAME
Select and install roof sheeting and wall cladding

UNIT CODE
CPCPRF2023

Collect and store roof water

UNIT CODE :
CPCPRF2023

Unit description :
This unit specifies the skills and knowledge required to collect and store roof water. It includes installing storage tanks and related piping for the collection and storage of roof water.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Collect and store roof water

UNIT CODE
CPCPRF3022

Fabricate and install roof drainage systems

UNIT CODE :
CPCPRF3022

Unit description :
This unit specifies the skills and knowledge required to fabricate and install roof drainage systems and associated rainwater components.

Pre-requisite unit :
CPCPCM2043 , CPCPCM2055
UNIT NAME
Fabricate and install roof drainage systems

UNIT CODE
CPCPRF3023

Fabricate and install external flashings

UNIT CODE :
CPCPRF3023

Unit description :
This unit specifies the skills and knowledge required to fabricate and install external flashings.

Pre-requisite unit :
CPCPCM2043 , CPCPCM2055
UNIT NAME
Fabricate and install external flashings

UNIT CODE
CPCPRF3024

Install roof components

UNIT CODE :
CPCPRF3024

Unit description :
This unit specifies the skills and knowledge required to install roof components. It includes flashing penetrations through a roof to maintain weatherproofing.

Pre-requisite unit :
CPCPCM2043 , CPCPCM2055
UNIT NAME
Install roof components

UNIT CODE
CPCPRF3025

Install roof coverings to curved roof structures

UNIT CODE :
CPCPRF3025

Unit description :
This unit specifies the skills and knowledge required to set out and install a curved roof on a roof structure. It includes drawing fabrication patterns based on sketches of roof coverings, calculating curve dimensions and sheet lengths, and selecting required roofing materials.

Pre-requisite unit :
CPCPCM2043 , CPCPCM2055
UNIT NAME
Install roof coverings to curved roof structures

UNIT CODE
CPCPRF3026

Install roof sheets, wall cladding and complex flashings

UNIT CODE :
CPCPRF3026

Unit description :
This unit specifies the skills and knowledge required to install roof sheets, wall cladding and complex flashings.

Pre-requisite unit :
CPCPCM2043 , CPCPCM2055
UNIT NAME
Install roof sheets, wall cladding and complex flashings

UNIT CODE
HLTAID011

Provide First Aid

UNIT CODE :
HLTAID011

Unit description :
This unit describes the skills and knowledge required to provide a first aid response to a casualty in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies. The unit applies to all persons who may be required to provide a first aid response in a range of situations, including community and workplace settings.
UNIT NAME
Provide First Aid

UNIT CODE
UNIT NAME

UNIT CODE
CPCPCM2039

Carry out interactive workplace communication

UNIT CODE :
CPCPCM2039

Unit description :
This unit specifies the skills and knowledge required to carry out effective communication techniques underpinning work in the plumbing and services industry.
UNIT NAME
Carry out interactive workplace communication

UNIT CODE
CPCPCM3022

Weld polymer pipes using fusion method

UNIT CODE :
CPCPCM3022

Unit description :
This unit specifies the skills and knowledge required to fusion weld polymer pipes.

Pre-requisite unit :
CPCPCM2043
UNIT NAME
Weld polymer pipes using fusion method

UNIT CODE
CPCPRF4011

Design and size roof drainage systems

UNIT CODE :
CPCPRF4011

Unit description :
This unit specifies the skills and knowledge required to design, size and document the layout of roof drainage systems for Class 1 and 6 buildings as defined in the National Construction Code (NCC).
UNIT NAME
Design and size roof drainage systems

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Bracken Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Ashmore	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Cairns	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Townsville - Trade Training Centre Bohle	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Roof Plumbing (CPC32620)

Ask a question

Certificate III in Roof Plumbing

COURSE CODE: CPC32620

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

Eye protection - safety glasses or clip-ons where prescription glasses are normally worn (must conform to the Australian Standard 1336 or 1337)
Protective footwear - safety toe cap and non-slip soles to AS2210
Protective clothing - appropriate work wear (no sleeveless shirts or singlets)
Ear protection - as directed - ear muffs or ear plugs (recommended)
Disposable dust masks/respiratory aids as directed (recommended)
pens
notepad
scientific calculator
a copy of the Australian Standards (AS3500 Part 1 - 5)

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate III in Gas Fitting

Complete this course with TAFE Queensland to become a qualified gas fitter and gain your interim gas work licence. This is an essential qualification for those wanting to progress to their full gas work licence.

Careers

Gasfitter

Next Start : 28 Jan 2025

Certificate III in Plumbing

This trade qualification will give you the skills and experience you need to apply to the QBCC for your plumbing licence.

Careers

Gasfitter
Drainer
Plumber

Certificate IV in Building and Construction

Take your building business to the next level by completing this qualification with TAFE Queensland. This course is perfect for builders or owners of small to medium-sized building businesses.

Careers

Builder
Construction Supervisor
Construction Managers
Site Manager
Site Supervisor

Part Time : 1 year

Next Start : 28 Jan 2025

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Roof Plumbing

Course overview

What can I do?

Course outcome:

Free apprenticeships

Construction Skills Queensland (CSQ) Funding

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Roof Plumbing

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Selection criteria

Resources required

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate III in Gas Fitting

Careers

Certificate III in Plumbing

Careers

Certificate IV in Building and Construction

Careers